EWC Code
Waste hydraulic oils
EUR-Lex Commission Decision 2000/532/EC — Official Journal L 226, 06/09/2000Annual Volume
800,000 tonnes/year EU waste hydraulic oil
Valorisation Range
€320M waste hydraulic oil re-refining market
Primary Route
Re-refining to base oil
Need verified buyer contacts with location-specific pricing?
Get contacts for EWC 13 01Waste hydraulic oils arise from scheduled oil changes, system overhauls and contamination events across industrial and mobile equipment. EU hydraulic oil consumption is approximately 1.2 million tonnes/year, with waste generation reflecting the 2–4 year service life of typical mineral oil-based fluids. Hydraulic oils include mineral oil types, synthetic esters (fire-resistant), polyglycol types and water-glycol emulsions with very different waste management routes.
Most hydraulic oils are classified hazardous at 6-digit level (13 01 09*, 13 01 10*, 13 01 11*, 13 01 12*, 13 01 13*) due to petroleum hydrocarbon content and additives including zinc dialkyldithiophosphate (ZDDP), amine antioxidants and chlorinated extreme-pressure additives in older formulations. Contamination with water, metal particles, varnish and degraded additive packages determines whether regeneration or energy recovery is the appropriate disposal route.
EU Waste Oil Directive (incorporated into WFD Article 21) establishes the waste oil hierarchy: regeneration (re-refining to base oil) preferred over combustion with energy recovery, preferred over disposal. Member states must report regeneration rates annually. Re-refining by vacuum distillation and hydrotreatment produces base oil meeting Group I or Group II specifications, displacing virgin mineral oil production.
Typical Generators
Established valorisation pathways for EWC 13 01, ranked by economic value and market depth. Re-refining to base oil is the primary route.
Waste hydraulic oil collected through licensed waste oil collectors is consolidated at re-refinery feedstock facilities. Vacuum distillation removes water and light fractions; hydrotreatment removes sulphur and nitrogen compounds; clay treatment or hydrotreating produces base oil meeting EN 228 or equivalent specifications. Re-refined base oil commands 85–95% of virgin base oil price.
Waste hydraulic oil not suitable for re-refining (polyglycol, water-glycol types or heavily contaminated mineral oil) is blended into derived liquid fuel (DLF) for co-processing in cement kilns under IED installation permits. Cement kiln co-processing achieves >99.99% destruction efficiency for organic compounds with energy and mineral recovery.
Small volumes of heavily contaminated or mixed waste hydraulic oil not accepted by re-refineries or cement kilns are incinerated in permitted hazardous waste incinerators. Energy recovery required; direct disposal to landfill is prohibited for liquid waste under Landfill Directive 1999/31/EC Article 5(3).
These are the established routes for EWC 13 01. Which one your stream qualifies for depends on its composition, volume and region.
Get the ranked options for your streamPrimary & secondary off-takers
Re-refine collected waste hydraulic oil to Group I/II base oil for lubricant blending
Co-process waste hydraulic oil as alternative fuel in cement kiln with energy and mineral recovery
Collect, transport and consolidate waste hydraulic oil from generators for re-refinery supply
Manage hydraulic oil change waste from internal test and maintenance operations
Source: NACE Rev.2 — Eurostat, 2008
Key legislative frameworks governing EWC 13 01 classification, transport, and treatment.
Article 21 establishes mandatory waste oil hierarchy: regeneration (re-refining) first, then combustion with energy recovery, then disposal. Member states must ensure separate collection of waste oil where technically feasible and economically viable. Mixing of waste oil with hazardous substances that impedes re-refining is prohibited.
Waste hydraulic oils classified as UN 3077 (Environmentally hazardous substance, liquid, NOS) or UN 3082 for transport. Tank vehicles used for collection must be approved for petroleum-derived products. Carrier requires dangerous goods transport certification; driver requires ADR training certificate.
Re-refinery operations require IED installation permit; emissions from hydrotreating and vacuum distillation monitored against BAT-AELs for SO₂, NOₓ and volatile organic compounds. Cement kilns accepting waste oil as alternative fuel require co-incineration permit under IED Annex VI.
Leave your work email. Our industrial desk sends verified company contacts with location-specific pricing and contract minimums for waste hydraulic oils — not generic benchmarks.
Reviewed by our industrial desk within 1 business day.
Sectors that valorise EWC 13 01 as an input material or secondary raw material.
Waste-stream pages and resources connected to EWC 13 01 valorisation.
Explore EU waste flows — Waste Atlas
Visualise 17 years of E-PRTR industrial facility data. See how EWC 13 01 and related waste streams flow across European industries and sectors.
Source: EUR-Lex Commission Decision 2000/532/EC · NACE Rev.2 — Eurostat 2008
Browse all EWC codes