EWC Code
Wastes from manufacture of cement, lime and plaster and articles and products made from them
EUR-Lex Commission Decision 2000/532/EC — Official Journal L 226, 06/09/2000Annual Volume
~50 Mt/year EU kiln dust + rejects
Valorisation Range
€0–20/tonne (internal reuse premium)
Primary Route
Kiln Feed Recirculation
Need verified buyer contacts with location-specific pricing?
Get contacts for EWC 10 13EWC 10 13 covers solid residues arising during the manufacture of cement, lime and plaster, including cement kiln dust (CKD), lime kiln dust (LKD), concrete and pre-cast rejects, and uncured mortar. These streams arise at multiple kiln points: cyclone pre-heater, calciner, and electrostatic precipitator, each with different alkali content and mineralogy.
Cement kiln dust (CKD) contains significant lime (CaO), calcium carbonate and alkali sulphates. When the alkali bypass is limited, CKD can be recycled directly into the kiln feed. Excess CKD is marketed for soil stabilisation (NACE 42.11), agricultural pH correction, and as a partial cement substitute in lower-strength applications. Cembureau reports that EU cement plants achieve >85% valorisation of CKD through kiln recirculation or external sale.
Pre-cast concrete rejects and wash-water sludges from concrete plants are EWC 10 13 17 or 10 13 06 respectively. These are increasingly processed through concrete wash-water recycling systems (NACE 23.61) that separate aggregate (reused as secondary aggregate) and cement paste (returned to mixer or used in low-grade fill). Zero-reject concrete plants now operate across the Netherlands, Germany and Belgium.
Typical Generators
Established valorisation pathways for EWC 10 13, ranked by economic value and market depth. Kiln Feed Recirculation is the primary route.
Cement kiln dust (CKD) with alkali below kiln-feed limits is directly re-injected at the kiln inlet, displacing raw material inputs. Modern ILC (in-line calciner) kilns achieve 100% CKD recirculation for low-alkali dust fractions. No external licensing required for on-site recirculation.
High-free-lime CKD and lime kiln dust (LKD) are applied to weak subgrade soils for civil engineering ground improvement under BRE Digest 427. Agricultural application corrects pH of acid soils (lime equivalent value 40–70 CaO%). Both routes require nutrient and heavy metal analysis under the Soil Conditioner Directive.
Cement kilns (1,450°C, 6+ second residence time) are the leading platform for alternative fuel co-processing under EU IED Annex VI. CKD from co-processing kilns may contain elevated heavy metals requiring bypass control before external valorisation of the dust fraction.
These are the established routes for EWC 10 13. Which one your stream qualifies for depends on its composition, volume and region.
Get the ranked options for your streamPrimary & secondary off-takers
Internal kiln recirculation; CKD as raw meal component in kiln feed
Lime kiln dust as agricultural lime supplement and soil stabiliser
CKD and LKD for subgrade stabilisation; lime-treated base layers
High-alkali or off-spec CKD where valorisation markets are unavailable
Source: NACE Rev.2 — Eurostat, 2008
Key legislative frameworks governing EWC 10 13 classification, transport, and treatment.
Cement kilns burning waste are classified as co-incineration plants under IED Annex II. Dust, dioxin, and heavy metal emission limits apply to the kiln stack, affecting CKD quality parameters.
Best Available Technique Reference document for the Cement, Lime and Magnesium Oxide Manufacturing Industries (2013, revised 2020). BAT conclusions set maximum CKD bypass rates and kiln recirculation targets.
Concrete waste classified as LoW 10 13 14 is routinely crushed and screened to produce recycled concrete aggregate (RCA) certified under EN 13242. Compliant RCA achieves CE-marked status and displaces primary aggregate in sub-base and fill applications.
Leave your work email. Our industrial desk sends verified company contacts with location-specific pricing and contract minimums for wastes from manufacture of cement, lime and plaster and articles and products made from them — not generic benchmarks.
Reviewed by our industrial desk within 1 business day.
Sectors that valorise EWC 10 13 as an input material or secondary raw material.
Waste-stream pages and resources connected to EWC 10 13 valorisation.
Explore EU waste flows — Waste Atlas
Visualise 17 years of E-PRTR industrial facility data. See how EWC 10 13 and related waste streams flow across European industries and sectors.
Source: EUR-Lex Commission Decision 2000/532/EC · NACE Rev.2 — Eurostat 2008
Browse all EWC codes