We use cookies to improve your experience and save your reports. Privacy Policy

HomeRCRA CodesF ListF027
F List — Wastes From Non-Specific Sources Listed - toxic

RCRA Hazardous Waste Number

F027

Discarded unused formulations containing tri-, tetra-, or pentachlorophenol or discarded unused formulations containing compounds derived from these chlorophenols. (This listing does not include formulations containing Hexachlorophene sythesized from prepurified 2,4,5-trichlorophenol as the sole component.)

Official source: 40 CFR Part 261 (eCFR)

Hazard Basis

Listed - toxic

Regulation

40 CFR Part 261

Need recovery options for a F027 stream?

Map recovery routes for F027

Classification

See the full F list

Manufacturing process wastes that arise across many industries: spent solvents (F001-F005), electroplating and metal finishing wastes (F006-F019), and others. The code follows the process, not the industry.

How F027 is handled

01

F-listed wastes carry the code from the process that produced them, in any industry.

02

The mixture rule applies: mixing an F-listed waste into another stream generally makes the whole stream F-listed.

03

Spent solvent F codes (F001-F005) are among the most commonly recycled RCRA streams - solvent recovery and fuel blending are established routes.

Other F-list codes

F001The following spent halogenated solvents used in degreasing: Tetrachloroethylene, trichloroethylene, methylene chloride, 1,1,1-trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures/blends used in degreasing containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those solvents listed in F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixturesF002The following spent halogenated solvents: Tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2,2-trifluoroethane, ortho-dichlorobenzene, trichlorofluoromethane, and 1,1,2-trichloroethane; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those listed in F001, F004, or F005; and still bottoms from the recovery of these spent solvents and spent solvent mixturesF003The following spent non-halogenated solvents: Xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures/blends containing, before use, only the above spent non-halogenated solvents; and all spent solvent mixtures/blends containing, before use, one or more of the above non-halogenated solvents, and, a total of ten percent or more (by volume) of one or more of those solvents listed in F001, F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixturesF004The following spent non-halogenated solvents: Cresols and cresylic acid, and nitrobenzene; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixturesF005The following spent non-halogenated solvents: Toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, or F004; and still bottoms from the recovery of these spent solvents and spent solvent mixturesF006Wastewater treatment sludges from electroplating operations except from the following processes: (1) Sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning/stripping associated with tin, zinc and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminumF007Spent cyanide plating bath solutions from electroplating operationsF008Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are used in the process
View the full F list →

Where can a F027 stream go?

Recognized recovery routes for this waste family, ranked by typical recovery tier. Which route fits depends on your specific stream — composition, volume and region.

High-temperature combustion

Specialist handling

Dioxin-bearing wastes carry combustion-based treatment standards at the most tightly controlled permitted units; no material recovery route is recognized for the dioxin fraction.

40 CFR 268.40 — LDR treatment standards

Containment & specialist disposal

Specialist handling

Where combustion capacity is unavailable, secure containment under the land disposal restriction regime is the only compliant management — a pure liability stream.

40 CFR 268.40 — LDR treatment standards

These are the typical routes for the F list. Your stream's actual options depend on its composition and where it sits.

Get the ranked options for your stream

Get buyer contacts for RCRA F027

Leave your work email. Our industrial desk sends verified company contacts with location-specific pricing and contract minimums for discarded unused formulations containing tri-, tetra-, or pentachlorophenol or discarded unused formulations containing compounds derived from these chlorophenols. (this listing does not include formulations containing hexachlorophene sythesized from prepurified 2,4,5-trichlorophenol as the sole component.) — not generic benchmarks.

Reviewed by our industrial desk within 1 business day.

Related Resources

Deepen your understanding of industrial symbiosis and circular economy strategies.

Benefits of Industrial SymbiosisWhy turning waste streams into off-taker matches creates measurable economic and environmental valueHow AI Matching Technology WorksHow SymbioFlows pairs waste producers with verified off-takers at scaleCircular Economy GuideA practical introduction to closing material loops between industries